Artforma S2 User Manual - Page 6

Browse online or download pdf User Manual for Weather Station Artforma S2. Artforma S2 12 pages.

Print Page

s2 weather station conﬁguration

Reception of the DCF time signal

When the Weather Station receives the necessary data - information about the temperature

in the place where the external sensor is installed, it will start searching for a time signal

(transmitted by a DCF transmitter from Germany).

If you press

button, when the station is switched on, an information about the mode

/ WAVE

and intensity of DCF transmitter will appear on the screen. This intensity is distinguished

trough indica-tion on the screen: from one bar (which means the weakest signal) up to three

(he strongest sig-nal).

WARNING

When the clock receives a radio-controlled time signal, the buttons are not active, and the

bright-ness of the display screen is reduced. Once the signal is received, the brightness of the

display screen will be back to normal.

Upon reception of DCF time code, the weather station will automatically update an accurate

time. The clock will try to receive the DCF signal automatically every night at: 1:00 AM, 2:00

AM, 3:00 AM If it fails till 3.00 AM, the device will try to receive the signal once again at 4:00

AM and 5:00 AM. In case of failure, the device will stop attempts of reception till 1:00 AM on

the next day.

In order to launch the DCF signal reception manually, press the

button.

/ WAVE

In order to stop reception of the DCF signal, press the

button once again.

/ WAVE