ClearWater Lights BMW K1600GT Installation Manual - Page 9
Browse online or download pdf Installation Manual for Motorcycle Accessories ClearWater Lights BMW K1600GT. ClearWater Lights BMW K1600GT 12 pages. Billie brake light
Also for ClearWater Lights BMW K1600GT: Preliminary Manual (8 pages)
Print Page
Step 5: Wiring (Overview)
the high beam is activated.
• Find a good solid ground point for the black wire terminal ring.
• Use a Posi-twist to connect the green wire from the volume control knob
to the two green wires from the lights (3 wires).
• Use a Posi-twist to connect red wire from the fuse holder to the red
wires from lights and volume control knob (4 wires)
• Connect ground/black wire to black wires from lights and volume control
knob. (4 wires)
• If you would like to use the high beam feature (recommended), use a
Posi-tap to connect the white wire from the volume control knob to the
High Beam headlight hot lead (+). This will be on only when the high
beam is illuminated.
(Wire Routing / Battery)
Tap Into
White Wire
White Wire
(Headlight Wiring)
Tap Into
Blue / White Stripe
Red Wire
(Wire Routing)
(Wire Routing)
Page 9