Edic ENDEAVOR Owner's/Operator's Manual - Page 3
Browse online or download pdf Owner's/Operator's Manual for Floor Machine Edic ENDEAVOR. Edic ENDEAVOR 17 pages. Multi-purpose extractor
Also for Edic ENDEAVOR: Quick Manuals (15 pages)
Print PageRECEIVING YOUR NEW ENDEAVOR:
When your equipment is delivered, check the carton
carefully for signs of rough handling. If the ENDEAVOR
is damaged, notify the carrier immediately and request
an inspection. Be sure to keep the carton, packing in-
serts, packing lists and carrier's receipt until the inspec-
tor has verified your claim.
EDIC's liability ceases when the carrier picks up the
shipment. However, our customer service staff will be
happy to furnish any information needed in connection
with the claim and will attempt to expedite a resolution.
PLEASE READ BEFORE OPERATING YOUR
NEW ENDEAVOR:
Read the manual carefully and completely before at-
tempting to operate the unit. This manual has important
information for the use and safe operation of the ma-
chine. Keep this manual handy at all times.
This equipment has been engineered and manufactured
to provide excellent performance and service. To ensure
that your equipment will continue to perform as intend-
ed:
•
Maintain equipment regularly- following the sug-
gested maintenance schedule provided.
•
Use only original EDIC parts when servicing.
•
Operate equipment with care.
All information and specifications printed in the man-
ual are current at the time of printing; however because
of EDIC's policy of continual product development, we
reserve the right to make changes at any time without
notice.
FAILURE TO COMPLY WITH THE FOLLOWING
WARNINGS AND INSTRUCTIONS MAY POSE A
HAZARD AND WILL VOID THE WARRANTY.
WARNINGS AND SAFETY:
•
This is not a toy. Keep away from children.
•
Always read and understand your chemical's MSDS (Ma-
terial Safety Data Sheet) before use.
•
This extractor is not designed to handle or use combus-
tible/volatile substances such as gasoline or kerosene, in,
on, or near the equipment. The use of such materials will
cause extreme hazardous condition.
•
Make sure the extractor has all water filters in place.
•
Use only commercially available cleaning chemicals in-
tended for use with extraction machines of this type. Do
not use dyes, bleaches, ammonia, or other additives.
•
Do not allow high pressure spray stream to remain in one
fixed location as surface damage may occur.
•
Check that all spray nozzles are securely fastened. Loose
nozzles could be ejected from equipment at high speeds.
•
Prevent burns by wearing gloves or using a barrier to
remove hot quick disconnects.
•
Use caution with ejected liquid or chemicals. High pres-
sures and temperatures could be hazardous to nearby peo-
ple or surroundings.
•
All servicing of EDIC equipment should be performed
only by EDIC authorized service centers.
•
Do not use replacement parts other than those specified in
the parts list. Equipment performance could be affected if
substitutions are made.
•
When using an extension cord, use only a 3-prong con-
ductor grounding cord-12 gauge wire or heavier. Do not
use extension cords longer than 25FT.
•
To avoid electric shock, do not expose the unit to rain or
snow. Store it indoors in a heated location only. Do not
expose machine to freezing temperatures.
•
Do not use the machine for dry vacuuming.
•
Use defoamer at all times to prevent damage to the vacu-
um motor.
•
Do not use water in excess of 130°F (54°C) in the solution
tank
•
To prevent seal damage and chemical build-up to the
pump system, run clean water through the solution lines
after each day's use.
•
Use only commercially available carpet cleaning solutions
and defoamer intended for use with machines of this type.
Do not use dyes, bleaches, ammonia, or other additives.
•
The use of powdered cleaning solution, if not diluted
properly, may result in damage to the pump. Powdered
chemical is not recommended. If powdered chemicals are
used, premix in a separate container before placing in the
Any damage resulting from powdered
solution tank.
chemical will void the warranty.
•
Do not pull machine by the power cord. Always unplug by
grabbing the plug and pulling, do not unplug by pulling
the power cord.
•
Inspect cord for damage. Do not use damaged cords. Con-
nect only to properly grounded outlets.
•
Keep hair, fingers, loose clothing, and body parts away
from moving parts and openings.
•
Turn off all controls before disconnecting machine
•
Do not use without vacuum pre-filter bag in place
•
Never leave equipment unattended while power cords are
plugged in to an electrical source.
3