ARTFOX Lighting Magic 2R Instruction Manual - Page 17

Browse online or download pdf Instruction Manual for Lighting Equipment ARTFOX Lighting Magic 2R. ARTFOX Lighting Magic 2R 19 pages.

Print Page

7. Maintaining and Cleaning the Light

The light is a fixture of very low maintenance. It is only necessary to clean the air

inlets and outlets as well as the optical lenses from time to time. For safe operation it

is absolutely essential that the fixture is kept clean and that dust, dirt and smoke-fluid

residues must not build up on, or within the fixture. Otherwise the fixture's light-output

will be significantly reduced or damages can occur. Regular cleaning will not only

ensure the maximum light-output, but will also allow the fixture to operate reliably

throughout its life.

A soft lint-free cloth moistened with any good glass cleaning fluid is recom-

mended, under no circumstances should alcohol or solvents be used!

1. Pull out the mains power plug!

2. Wait min. 15 minutes after disconnecting power to allow the fixture to cool

down.

7.2.

The contamination of the fixture depends on the environment details. Hence no

general guidelines can be given. The intervals given below are only suggestions

from our experience.

Position

Optical system

Fan and air channel

Attention:

1 Never let optical parts come into contact with oil or fat.

2 Before running the fixture wait until all parts are dry.

3 Never tough lenses with bare fingers.

Interval

weekly

monthly

In this way

soft brush /lint-free cloth

vacuum cleaner, airbrush, etc.