Edic Aviator Owner's Manual & Parts List - Page 3
Browse online or download pdf Owner's Manual & Parts List for Fan Edic Aviator. Edic Aviator 8 pages. Axial air mover
Print Page
• When using an extension cord, use only a 3-prong conductor grounding cord 12 ga. wire or
heavier.
• Check GFCI protection before each use by pushing the "test" button. If operating properly the
"reset" button will pop out.
• Never operate with the safety grills removed. Personal injury may result.
• Do not plug more than 9.0 amps total into the GFCI outlet.
• To avoid electric shock, do not expose the unit to rain. Store it indoors only.
• Do not expose machine to freezing temperatures.
• Do not move or carry the unit when it is turned on.
• Do not pull or carry by the cord, use cord as a handle, close a door on the cord, or pull cord around
sharp edges or corners.
• Keep cord away from heated surfaces.
• Do not unplug by pulling on cord. To unplug the unit, grasp the plug, not the cord.
• Do not handle plug or air mover with wet hands.
• Do not put object into openings. Do not use with any opening blocked; keep free of dust, lint, hair
and anything that may reduce air flow.
• Keep hair, loose clothing, fingers and all parts of the body away from openings and moving parts.
• Turn off all controls before unplugging.
• Connect to a properly grounded outlet only. See grounding instructions.
• Operate unit on level and stable surface to prevent it from falling and possibly causing injury.
• Do not drop or throw the unit. Treatment of this type can cause damage to the components and
create a hazardous condition.
• To reduce the risk of fire or electric shock, do not use this air mover with any solid-state speed
control devices.
FAILURE TO COMPLY WITH THE ABOVE WARNING INSTRUCTION
WILL VOID THE WARRANTY.
GROUNDING INSTRUCTIONS:
The 120 V. A/C and the 220 V. A/C models have been outfitted with the appropriate grounded
connectors. Make sure the machine is connected to a grounded outlet having the same configuration
as the grounded plug. No adaptor should be used with this machine. Any modification to the
connectors will void the warranty.