Altronics Redback A 4395 Operating Manual - Page 4

Browse online or download pdf Operating Manual for Amplifier Altronics Redback A 4395. Altronics Redback A 4395 8 pages. 500 watt mixer amplifier

Fig 1 shows the layout of the front panel.
Volume 1
Treble Bass
6
4
VOX
Sens.
8
2
0
10
1
2
3
1
Bass and Treble Controls
Use these controls to adjust the bass and treble.
2
Vox level control
Use this control to adjust the vox sensitivity of input 1.
3
Input 1 volume control
Use this control to adjust the output volume of input 1.
4
Music Input
Use this input to connect a portable music player. This input over-rides the rear input 2 and is adjusted via the
volume 2 pot.
5
Input 2 volume control
Use this control to adjust the output volume of input 2.
6
Signal Presence Indicator
This LED indicates when an input signal is present.
7
Peak Limit Indicator
This LED indicates when the input signal is clipping.
8
VOX Active Indicator
This led indicates when the VOX muting is active.
9
Over Temp Indicator
This LED indicates when the amplifier is overheating. The output will be disconnected until the amplifier is once
again cool enough to operate.
10
Current Limit Indicator
This LED indicates when the output is drawing too much current from the amplifier. The output will be
disconnected until the current draw is reduced.
11
Shut Down Indicator
This LED indicates when the amplifier has an over temp occurrence or if the internal circuitry has a fault.
12
24V DC Indicator
This LED indicates when the amplifier is being powered from the 24V input.
13
Mains Indicator
This LED indicates when the amplifier is being powered from the mains (230V AC).
14
On Indicator
This LED indicates the unit has power.
15
Power Switch
Use this to turn the unit on.
4
Redback® Proudly Made In Australia
Volume 2
6
4
Music
Input
8
2
0
10
4
5
Signal Status
Fault Status
Power Status
Present
Peak
VOX
Over
Current
Shut
24V DC
Limit
Temp
Limit
Down
Active
6 7 8 9 10 11
12 13 14
Fig 1
500W
Public Address Mixer
Model : A 4395
Mains
On
www.altronics.com.au
Power
15