Altronics Redback A 4510 Software Programming Manual - Page 2
Browse online or download pdf Software Programming Manual for Timer Altronics Redback A 4510. Altronics Redback A 4510 16 pages. Yearly timer
Also for Altronics Redback A 4510: Operating Manual (12 pages)
Print Page
A 4510 Software Programming Guide
1.0 RUNNING THE PROGRAMMING SOFTWARE
The software is provided on the supplied SD Card and is called "RedbackA4510TimerProgrammer".
In order to access the program, the SD card will need to be connected to a Windows based device such as a PC or laptop.
It will need to be equipped with an SD card reader to do this. If an SD slot is not available then the Altronics D 0371A USB
Memory Card Reader or similar would be suitable (not supplied).
You will first need to remove power from the A 4510 and then remove the SD card from the rear of the unit.
To remove the SD card push the card in and it will eject itself.
Make sure the Windows based device is on and card reader connected and correctly installed. Then insert the SD card into
the reader.
Go to "My Computer" or "This PC" and open the SD card which is usually marked "Removable disk".
In this case it is named "Removable disk (F:)". Select the removable disk and then you should get a window that looks like
figure 1.
It is recommended to run the program from the SD card.
Double click on the file - RedbackA4510TimerProgrammer.
The programming screen should appear as shown in Fig 2.
If the program doesn't run then the .NET Framework might
need to be updated on your PC.
This must be updated to the .NET Framework 4, available
on the microsoft website.
Fig 1
Fig 2
2
Redback® Proudly Made In Australia
www.altronics.com.au