Altronics Redback A 4510 Software Programming Manual - Page 9

Browse online or download pdf Software Programming Manual for Timer Altronics Redback A 4510. Altronics Redback A 4510 16 pages. Yearly timer
Also for Altronics Redback A 4510: Operating Manual (12 pages)

Altronics Redback A 4510 Software Programming Manual
A 4510 Software Programming Guide
Now let's repeat the process for the first bell of the day which will
occur at 8:30AM. We will enter the details as shown in the figure to
the right. The start time is set to 08:30:00, with a duration of 3
seconds. The output is set to Bell, which will activate the one and
only MP3 audio file allowed in the "Bell" folder of the SD card.
After the details are entered we press OK to confirm, only to receive a error message "Unable to save Event".
This has occurred because there is an overlap of times. The "PrebellMusic" Event and the "FirstBell" Event overlap at
08:30:00. If we change the duration of the first event (PrebellMusic) to 4:59, then the first event will finish at 08:59:59 and
then the overlap is removed.
To change the PrebellMusic Event ,simply highlight this event and press the edit button. The Event window will appear and
then the changes can be made. Once done, the FirstBell Event can be programmed and saved and will appear in the Events
list as shown in figure 13.
Fig 13
www.altronics.com.au
Redback® Proudly Made In Australia
9