dji M300 RTK User Manual - Page 7

Browse online or download pdf User Manual for Drones dji M300 RTK. dji M300 RTK 15 pages.
Also for dji M300 RTK: Firmware Update Manual (6 pages)

Print Page

etc.) to remove or install the propellers.

5. Ensure the propellers and mounting screws are securely mounted

to prevent them from falling off the motors.

6. DO NOT turn on the motors when propellers are mounted and

there are other people or animals in the immediate vicinity.

7. Using third-party propellers may compromise the aerodynamics of

the aircraft. For a better and safer flight experience, we recommend

you to use original DJI propellers only.

8. Wipe the propellers to make them dry before each flight where

the surrounding temperature is around 0℃ (32℉) to avoid the

propellers from having frosted.

Motors

1. Ensure the motors are securely mounted and rotating smoothly.

2. Ensure proper installation and that the motor functions normally

before each flight. If the the ventilation holes on the motors are

blocked, clear them before flight. If the cover is aging, damaged or

deformed, please contact DJI or a DJI authorized dealer.

3. DO NOT attempt to modify the structure of the motors.

4. DO NOT touch or let your hands or body come in contact with the

motors after flight as they may be hot.

Electronic Speed Controllers

1. If required before each flight, follow the app prompts to fix the

abnormalities of the electronic speed controllers.

2. Please land the aircraft if the DJI Pilot app prompts that there is

something wrong with the electronic speed controllers (e.g. over

temperature, low voltage or overload).

To avoid possible serious injury and property damage, observe the

following rules:

1. DO NOT block any of the ventilation holes on the motors.

2. DO NOT block any of the ventilation holes on the frame arm of the

aircraft.

Motors

1. To avoid affecting the motor service life, do not take off or land the

aircraft on sandy or dusty areas.

2. Keep the motors free of dust and ensure the motor vents are not

blocked.

3. If a motor is stuck and unable to rotate freely, execute the CSC

(Combination Stick Command) to stop the motors immediately.

Electronic Speed Controllers

Ensure the electronic speed controllers sound a normal tune when

powered on.

DJI Pilot App

1. Be sure to fully charge your tablet or mobile device (if used)

before launching the app. CRYSTALSKY™ is recommended for a

better experience.

2. If you are using a phone as your mobile display device, be sure to

continue flying safely when the phone receives an incoming call.

DO NOT accept phone calls during flight.

3. Mobile cellular data is required when using the DJI Pilot app.

Please contact your wireless carrier for data charges.

4. Read all prompted safety tips, warning messages, and disclaimers

carefully. Be familiar with the related regulations in your area. You

are solely responsible for being aware of all relevant regulations

and flying in a way that is compliant.

a. Read and understand the warning messages before resetting

your Home Point.

b. Read and understand the warning messages and disclaimer

before setting the altitude beyond the regulatory limit.

c. Read and understand the warning messages and disclaimer

before switching between the flights modes.

5. Land your aircraft immediately at a safe location if there is an alert

shown on the app.

6. Examine and check all warning messages on the checklist

displayed in the app prior to each flight.

7. Use DJI ASSISTANT

2 to practice your flight skills if you have

never operated the aircraft or if you DO NOT have sufficient

experience to be comfortable operating the aircraft.

8. Cache the map data of the area where you intend to fly the aircraft

by connecting to the Internet before each flight.

9. The app is designed to assist your operation. Please use your

sound discretion and DO NOT rely on the app to control your

aircraft.

10. Your use of the app is subject to the DJI Pilot app Terms of Use

and DJI Privacy Policy. Please read them carefully in the app.

Firmware

To avoid serious injury to children and animals, observe the following

rule:

1. Keep children and animals at a safe distance during any firmware

upgrade, system calibration, and parameter setting procedures.

1. For safety, always update the firmware to the latest version when

an upgrade notification is shown in the DJI Pilot app.

2. Firmware upgrade notifications will inform about new firmware

upgrades. You are required to read and understand the

information shown.

3. Be sure to update the remote controller's firmware to the latest

version after you update the aircraft's firmware.

4. The remote controller may become unlinked from the aircraft after

updating.

5. Be sure to check all connections and remove the propellers from

the motors before performing the firmware update.

SDK

1. Before using the DJI SDK, you should agree to the DJI SDK

read them carefully at https://developer.dji.com/policies/.

Camera (Optional)

To avoid possible serious injury and property damage, observe the

following rule:

1. DO NOT block any ventilation holes on the camera as the heat

generated may hurt you and damage the device.

1. Before use, check camera settings to make sure they are adjusted

to fit your needs.

2. Test the camera by shooting a few test images and check that it is

operating correctly before shooting important pictures or videos.

3. DO NOT remove the microSD card from the gimbal camera when

it is powered on. Please use officially recommended microSD

cards.

4. Be sure to power off the Intelligent Flight Battery correctly,

otherwise your camera parameters will NOT be saved and any

recorded videos may be damaged.

5. Regardless of the reason, DJI will not be responsible for any failure

of an image or video to be recorded or having been recorded in a

way that is not machine readable.

Gimbal (Optional)

1. Precision elements in the gimbal may be damaged in a collision or

impact, which may cause the gimbal to function abnormally.

2. DO NOT apply external force to the gimbal after the gimbal is

powered on.

3. DO NOT add any payloads to the gimbal, as this may cause the

gimbal to function abnormally or even lead to motor damage.

4. The gimbal and gimbal connector are very delicate. Handle with