dji MAVIC 2 ZOOM Faq - Page 8

Browse online or download pdf Faq for Drones dji MAVIC 2 ZOOM. dji MAVIC 2 ZOOM 8 pages. V1.0
Also for dji MAVIC 2 ZOOM: Quick Start Manual (13 pages), Faq (5 pages), Quick Start Manual (12 pages)

Print Page
dji MAVIC 2 ZOOM Faq
Connect the Mavic 2 to the DJI GO 4 app. The app will then check firmware compatibility
automatically. You may upgrade according to the instructions.
Does the Mavic 2's remote controller support hot swapping while
connected to DJI Assistant 2?
No. You need to connect the remote controller with a USB cable and then power on to
connect to DJI Assistant 2.
What factors could lead to an update failure?
1. Low-battery level.
Before installing an update, make sure the battery level is above 50%.
2. Powering off the Mavic 2 or the remote controller during an update.
If this happens, restart the Mavic 2 and the remote controller, and begin the update again.
3. Internet was disconnected during the firmware download.
If the update failure persists, or the remote controller does not link with the aircraft, there
may be firmware inconsistencies between devices. In this case, use DJI Assistant 2 on your
computer to update the aircraft and the remote controller to the latest versions separately.