Arthur Grillo PFT Series Operating And Installation Instructions - Page 14

Browse online or download pdf Operating And Installation Instructions for Transmitter Arthur Grillo PFT Series. Arthur Grillo PFT Series 16 pages.

Print Page

WARRANTY & SUPPORT

Temperature:

Resolution:

Characteristics:

Response time:

Reproducibility:

Tolerance:

PFT28:

Housing:

Protection class:

Dimensions:

Storage temperature:

Weight:

Power supply:

Power consumption:

Display:

Outputs:

Output 1:

Output 2:

Special

measuring range:

Duct:

Assembly:

Temperature range:

Room:

Assembly:

Temperature range:

Cable:

Assembly:

EMC:

14 bits

linear

approx. 20 seconds

atandard sensor:

±0.1°C ±0.1°C

±0.5°C at 25°C

±2.0°C at -40°C

±3.0°C at +120°C

ultramid with hinged lid of ABS

mounted sensor tube for receiving the sensor

IP 54 according to EN 60529; UL 94 HB

95 x 70 x 54 [mm] (w x h x d)

-25...+ 60 °C

approx. 300 g

15...30 Vdc; 24 Vac (±15%)

approx. 14 mA @ 24 Vac at 0...10 V output

two-line alphanumeric LCD, 2x16 characters

0/2...10 V or 0/4...20 mA with DIP switch and jumper

temperature -30...+50°C (other measuring ranges possible)

four selectable measured variables (DIP switches):

relative humidity:

dew point temperature:

wet bulb temperature:

enthalpy:

absolute humidity:

sensor tube made of stainless steel, 11 mm Ø at the back

mounting flange for attachment to the duct

sensor: -40...+120 °C

electronics: -10...+50 °C

sensor tube made of stainless steel, 11 mm Ø at the front

mounting on the wall

sensor: -40...+120 °C

electronics: -10...+50 °C

sensor tube made of stainless steel, 11mm Ø with 2m cable fixed

mounting the housing on the wall, mounting flange for the sensor

tube

test according to EN 61000-6-2, EN 61000-6-3, CE mark

Doc.-no.: PFT_01_EN

Sensor with embedded tolerance:

±0.3°C at 25°C

±1.5°C at -40°C

±2.0°C at +120°C

0...100 %

-30...+50 °C

0...200 kJ/kg

0...50 g/kg

Issue: 05/2017