dji PHANTOM 3 PROFESSIONAL Quick Start Manual - Page 3
Browse online or download pdf Quick Start Manual for Drones dji PHANTOM 3 PROFESSIONAL. dji PHANTOM 3 PROFESSIONAL 4 pages. Intelligent flight battery heater
Also for dji PHANTOM 3 PROFESSIONAL: Quick Start Manual (10 pages), Quick Start Manual (8 pages), User Manual (3 pages), Advanced Manual (16 pages)
Print Page
Remove the gimbal clamp as shown on the
right. Place your Phantom 3 Professional on a
flat surface, in an open space, with the nose
facing away from you. Then follow the steps
below in this order:
1
4
3
6
5
8
7
Your Phantom 3 Professional can automatically takeoff and land at the tap of a button in the Camera screen of the DJI
Pilot app.
Tap and slide to confirm automatic takeoff.
The aircraft will automatically takeoff and
hover at 5 feet (1.5 meters).
2
Toggle the Flight Mode Switch on your Remote Controller
1
to the right (P Mode). P Mode is Positioning Mode, A
Mode is ATTI Mode, and F Mode is Function Mode.
Turn on the Remote Controller by pressing the power
button once, releasing it, and then pressing and holding
for 2 seconds.
Insert the Intelligent Flight Battery into your Phantom 3
Professional. Turn on the battery by pressing the power
button once, releasing it, and then pressing and holding
for 2 seconds.
Ensure the LED on your Remote Controller is green,
indicating it is ready to be used.
5
Connect your mobile device to the Remote Controller
with a USB cable and launch the DJI Pilot app. Follow the
instructions within the app.
In the app, tap 'Camera'. Ensure your Phantom 3
6
Professional is ready to fly by completing the on-screen
Checklist. Beginner Mode is enabled by default when
you launch the DJI Pilot app for the first time. The
aircraft's altitude and flight distance are restricted when
flying in Beginner Mode. You can disable Beginner
Mode in the Settings Page of the DJI Pilot app.
Calibrate the compass by tapping the Aircraft Status
7
Bar in the app and selecting 'Calibrate'. Then follow the
on-screen instructions.
Attach the propellers with a black nut onto the motors
8
with a black axis and spin them counter-clockwise to
secure. Attach the propellers with a gray nut onto the
motors with a gray axis and spin them clockwise to secure.
Before taking off, make sure the Aircraft Status Bar in the DJI Pilot app
indicates 'Safe to Fly (GPS)' or 'Safe to fly (non-GPS)' if flying indoors.
Tap and slide to confirm automatic landing.
The aircraft will automatically land.