dji Agras T25 Quick Start Manual - Page 3
Browse online or download pdf Quick Start Manual for Quadcopters dji Agras T25. dji Agras T25 7 pages. Atomized sprinkler package
Also for dji Agras T25: Product Information (18 pages)
Print Page
Unfold the M3 and M4 arms, and fasten the two arm locks. Avoid pinching fingers.
Unfold the M1 and M2 arms, and fasten the two arm locks. Avoid pinching fingers.
Unfold the propeller blades.
Insert the Intelligent Flight Battery into the aircraft until you hear a click.
Make sure that the battery is firmly inserted into the aircraft. Only insert or remove the battery when
the aircraft is powered off.
To remove the battery, press and hold the clamp and lift the battery up.
Fold the M1 and M2 arms followed by the M3 and M4 arms. Otherwise, the arms may be damaged.
Getting Ready for Takeoff
A. Place the aircraft on open, flat ground with the rear of the aircraft facing toward you.
B. Make sure that the propellers are securely mounted, there are no foreign objects in or on the motors and propellers,
the propeller blades and arms are unfolded, and the arm locks are firmly fastened.
C. Make sure that the spray tank and flight battery are firmly in place.
E. Power on the remote controller, make sure that the DJI Agras app is open, and power on the aircraft. Tap Start in
the home screen of the app to enter Operation View. Make sure that the GNSS signals are strong and the screen
shows Ready to GO (GNSS) or Ready to GO (RTK). Otherwise, the aircraft cannot take off.
RTK positioning is recommended. In the app, go to Operation View, tap
method for receiving RTK signals.
Calibrating the Flow Meter
Make sure to calibrate the flow meter in the following situations:
Change liquid payload with different viscosity.
The difference between the actual area and planned area is more than 15% after the first operation.
Calibrating procedure
A. Get Ready to Calibrate
① Fill the spray tank with approximately 2 L of water.
> RTK, and select a