dji PHANTOM 3 PROFESSIONAL Quick Start Manual - Page 8
Browse online or download pdf Quick Start Manual for Quadcopters dji PHANTOM 3 PROFESSIONAL. dji PHANTOM 3 PROFESSIONAL 10 pages. Intelligent flight battery heater
Also for dji PHANTOM 3 PROFESSIONAL: Quick Start Manual (8 pages), User Manual (3 pages), Quick Start Manual (4 pages), Advanced Manual (16 pages)
Print Page
7. Getting Ready for Takeoff
Remove the gimbal clamp as shown on the
right. Place your Phantom 3 Professional on a
flat surface, in an open space, with the nose
facing away from you. Then follow the steps
below in this order:
1
3
5
Tighten the propellers with both hands before each flight.
●
If you wish to record photos or videos, insert a Micro SD card into the Camera's Micro SD Card Slot.
●
The Flight Mode Switch is locked in P Mode by default. Refer to the User Manual to learn how to unlock the switch and change
●
to other modes.
When not in P mode, the Phantom 3 Professional will only maintain altitude, not position, and will drift with wind or user input.
●
Return to Home is not available in F mode.
8. Flight
Safe to Fly ( GPS )
●
Auto Takeoff and Landing:
Your Phantom 3 Professional can automatically takeoff and land at the tap of a button in the Camera screen of the DJI
GO app.
Tap and slide to confirm automatic takeoff.
The aircraft will automatically takeoff and
hover at 4 feet (1.2 meters).
2
Toggle the Flight Mode Switch on your Remote Controller
1
to the right (P Mode). P Mode is Positioning Mode, A
Mode is ATTI Mode, and F Mode is Function Mode.
Turn on the Remote Controller by pressing the power
button once, releasing it, and then pressing and holding
for 2 seconds.
Insert the Intelligent Flight Battery into your Phantom 3
Professional. Turn on the battery by pressing the power
4
button once, releasing it, and then pressing and holding
for 2 seconds.
DJI GO
Connect your mobile device to the Remote Controller
with a USB cable and launch the DJI GO app. Follow the
App
instructions within the app.
In the app, tap 'Camera'. Ensure your Phantom 3
5
Professional is ready to fly by completing the on-screen
Checklist. Beginner Mode is enabled by default when
you launch the DJI GO app for the first time. The
6
aircraft's altitude and flight distance are restricted when
flying in Beginner Mode. You can disable Beginner
Mode in the Settings Page of the DJI GO app.
Attach the propellers with a black nut onto the motors with
6
black dot and spin them counter-clockwise to secure.
Attach the propellers with a grey nut onto the motors
without black dot and spin them clockwise to secure.
Before taking off, make sure the Aircraft Status Bar in the DJI GO app
indicates 'Safe to Fly (GPS)' or 'Safe to fly (non-GPS)' if flying indoors.
Tap and slide to confirm automatic landing.
The aircraft will automatically land.