dji Phantom FC40 Getting Started Manual - Page 3
Browse online or download pdf Getting Started Manual for Quadcopters dji Phantom FC40. dji Phantom FC40 11 pages.
Print Page
- 1. Basic Definitions
- 2. Assemble Quadcopter and Install Camera on FC40
- 3. Phantom Software Installation and Upgrading
- 4. USB and Battery Connection for Upgrades and Settings
- 5. Naza Asst.
- 6. One of Many Screens in the DJI NAZA Assistant Software
- 7. Calibrate the Compass
- 8. Landing
- 9. Orientation
- 10. Share this
DJI Phantom 1 & FC40 setup – Getting Started Guide
USB and Battery Connection for Upgrades and Settings
1. Download and install the any drivers (windows only, none needed for mac) and the NAZA
Assistance programs from DJI install them – drivers first, then the Assistant program.
2. Connect your Phantom USB to your computer – open the battery compartment of your
Phantom (no battery installed) and locate the USB cable inside – pull it out and connect it to
your computer. Now turn on the DJI remote (transmitter) – put the S1 and S2 switches in the
UP position – and connect the battery to the DJI Phantom – leaving the battery hanging
outside the quadcopter. The LED on the FC40 should turn solid green when connected to
Copyright - Droneflyers.com - 2016