dji MATRICE 30 Series Manual - Page 15
Browse online or download pdf Manual for Camera Accessories dji MATRICE 30 Series. dji MATRICE 30 Series 17 pages. Parachute and circuit breaker system
Also for dji MATRICE 30 Series: User Manual (16 pages)
Print Page
OPERATING INSTRUCTIONS
Before each flight, you must check all the components of the system and verify its integrity. If any anomaly is
found, do not proceed with the flight and contact your dealer.
Test for proper operation on the ground:
- Ensure that the entire drone system is powered down. Batteries disengaged.
- Insert the safety pin
- Remove the "parachute" pods by unscrewing them.
- Remove the 2 pyrotechnic charges.
- Put in place the 2 test leds in place of the charges
- Put in place the 2 batteries and lock.
- Switch on the radio control of the drone.
- Switch on the radio control "parachute".
- Turn on the drone, the symbol
- Remove the safety pin, the symbol
- Switch on the drone's motors.
- Activate the "parachute" system by pressing the 2 "FIRE" buttons:
- The four motors stop. The 110dB buzzer sounds.
The symbol
appears.
The two test leds light up for 2 seconds in red or green.
- The buzzer continues to sound as long as the batteries are in place.
- Unlock and remove the batteries:
The system will remain powered for about one minute and the buzzer will stop.
- Turn off both radio controls.
FLYSAFE-M30
FUNCTIONAL TEST
appears.
appears.
Version 1.05
Version matériel 1.05
20/01/2023