dji RS 3 Quick Start Manual - Page 5
Browse online or download pdf Quick Start Manual for Camera Accessories dji RS 3. dji RS 3 18 pages.
Print Page
Button Feature
Power Button: press and hold the power button to turn on or off. Tap or press twice on the
power button to enter or exit sleep mode.
Battery Level Button: press once to check battery level.
Trigger: press once to start ActiveTrack. press and hold the trigger to enter Lock mode. Press
twice to recenter the gimbal. Press three times to turn the gimbal 180° so that the camera
faces you.
M Button: tap to select a user profile. Press and hold to enter Sport mode. Press and hold
while press twice on the trigger to stay in Sport mode. Press twice to enter portrait mode.
Press three times to enter Roll 360. Press and hold the M button which holding on the trigger
to begin auto tune.
Camera Control Button: after connecting the camera control port and camera, press halfway
for autofocus, as you would the shutter button on a camera. Press to start or stop recording.
Press and hold to take a photo.
Joystick: push the joystick up or down to control the movement of the tilt axis, and push it left
or right to control the movement of the pan axis. Go to the Joystick page of the Ronin app to
adjust the parameters for the pan, tilt, and roll axes.
Front Wheel: turn the wheel to control focus.
Gimbal Mode Switch: Toggle the switch to switch the gimbal mode from PTF, PF, and FPV.
Ronin App
Use the Ronin app for more features, such as gimbal and camera settings, force mobile.
Firmware Update
Download the DJI Pro Assistant for Ronin software from DJI website, and then follow the steps
below to update the firmware if there is new firmware available.
1. Connect the RS 3 and the computer via USB-C cable.
2. Launch the DJI Pro Assistant for Ronin, select update and wait for the process.
3. Reboot the RS 3.