fitness gear 810E User Manual - Page 5

Browse online or download pdf User Manual for Elliptical Trainer fitness gear 810E. fitness gear 810E 15 pages.

Print Page

A S SE MB LY S T E P 2

BOLT (D)

REAR

WHEEL

TRACKS

A) Open HARDWARE BAG FOR STEP 2.

B) Attach the REAR WHEEL TRAcKS to the MAIN FRAME using BOLTS (A) and 2 WASHERS (B) from the front.

Then finish securing the REAR WHEEL TRAcKS to the MAIN FRAME using 2 BOLTS (D), 2 NUTS (F) and

2 WASHERS (B) from the top.

C) Attach PEDAL ARM cOVERS to PEDAL ARMS using ScREWS (c).

HARDWARE BAG FOR STEP 2 CONTENTS :

BOLT (A)

70 mm

Qty: 2

SCREW (C)

Qty: 2

MAIN FRAME

PEDAL ARM COVER

SCREW (C)

WASHER (B)

BOLT (A)

NUTS (F)

WASHER (B)

17 mm

Qty: 4

BOLT (D)

NUT (F)

55 mm

Qty: 2

ASSEMBLY STEP

PRE ATTACHED SCREWS

WATER BOTTLE CAGE

CONSOLE MAST

NUTS (F)

TOP CAP

A) Open HARDWARE BAG FOR STEP 3.

B) Slide the TOP cAP over the cONSOLE MAST. Attach WATER BOTTLE cAGE using PRE ATTAcHED ScREWS.

C) Attach the cONSOLE MAST to the MAIN FRAME using BOLT (A), SPRING WASHER (D) and WASHER (B) from

the front and 2 BOLTS (E), 2 WASHERS (B) and 2 NUTS (F) from the side. Make sure to pull the WIRE

through the cONSOLE MAST.

D) Snap TOP cAP into place.

HARDWARE BAG FOR STEP CONTENTS :

BOLT (A)

SPRING WASHER (D)

15 mm

20 mm

Qty: 1

BOLT (E)

55 mm

Qty: 2

CONSOLE MAST

BOLT (A)

SPRING WASHER (D)

WASHER (B)

WASHERS (B)

BOLTS (E)

MAIN FRAME

WASHER (B)

17 mm

Qty: 3

NUT (F)

Qty: 2