dji FOCUS CP.ZM.000238.02 User Manual - Page 7

Browse online or download pdf User Manual for Remote Control dji FOCUS CP.ZM.000238.02. dji FOCUS CP.ZM.000238.02 12 pages.

Print Page

Quick Focus

Allows rapid switching between four preset focus points.

Assigning a Focus Point

Adjust the lens focus to the desired focus point by turning the focus wheel. Hold down one of

the letters until it blinks to store the focus point. To reassign a focus point, press and hold the

letter to discard its value, and then redo the first step.

Switching to a Focus Point

Press one of the letters to apply its assigned focus point. The OLED screen will display the

active Quick Focus letter. The selected letter will light up and the remaining letters will blink

rapidly. Press the active letter again to exit Quick Focus.

After selecting a Quick Focus button, you can fine tune the focus by turning the focus

wheel without changing its assigned value.

There are mechanical limits on both the focus wheel and lens motor. If the lens does

not respond to the focus wheel, check if the lens has reached its mechanical limit.

Aperture Control

Once aperture control is enabled, the 'D' button is used to switch between focus control and

aperture control.

To switch from focus control to aperture control, press the 'D' button and then follow the

instructions in the DJI GO app to operate the focus wheel.

The remote controller overrides the in-app controls. You will not be able to adjust the

focus , zoom or aperture in the DJI GO app.

Locking the Remote Controller

The remote controller can be locked to avoid unintentional operations. All controls except the

power button and OK button are disabled in the locked state.

DJI FOCUS User Manual