djm direct DJMMIG195 Manual - Page 3

Browse online or download pdf Manual for Welding System djm direct DJMMIG195. djm direct DJMMIG195 15 pages.

Print Page

DJMMIG195(GAS/NO GAS)

1. Handle

2. Thermostat control lamp

3. Housing cover

4. Switch for welding current adjustment

5. ON/OFF switch

6. Welding wire speed controller

7. Gas connection point

8. Wheels

9. Wheels

10. Mains plug

11. Earth clamp

12. Hose package

13. Torch

14. Welding nozzle

15. Welding tip

16. Torch trigger

17. Wire brush

18. Welding screen

19. Solid wire(Ø1.0mm, 1kg)

3. Unpacking

Open the packaging and remove the device carefully.

●

Remove the packaging material as well as the packaging and

●

transport bracing (if available).

Check if the delivery is complete.

●

Check the device and accessory parts for transport damage.

●

If possible, store the packaging until the warranty period has

●

expired.

ATTENTION

The device and packaging materials are not toys! Children must not

be allowed to play with plastic bags, film and small parts! There is a

risk of swallowing and suffocation!

4. Intended Use

The flux cored welding set is designed for self-shielding flux cored

welding using suitable wire. The additional application of gas is not

required.

The equipment is to be used only for its prescribed purpose. Any

other use is deemed to be a case of misuse. The user / operator and

not the manufacturer will be liable for any damage or injuries of any

kind caused as a result of this.

Please note that our equipment has not been designed for use in

commercial, trade or industrial applications. Our warranty will be

voided if the equipment is used in commercial, trade or industrial

businesses or for equivalent purposes.

5.Safety Precautions For All Types Of

Welding

5.1 WARNING:AS with all machinery, there are certain hazards

involved with their operation and use. Exercising respect and

caution will considerable lessen the risk of personal injury.

However, if normal safety precautions are overlooked, or ignored,

personal injury to the operator may result.

5.2 General precautions

5.2.1 Burn prevention

Wear protective clothing-gauntlet gloves designed for use in welding,

apron, and protective shoes. Button shirt collar and pocket flaps, and

wear cuffless trousers to avoid entry of sparks and slag. Wear helmet

with safety goggles or glasses with side shields underneath,

appropriate filter lenses or plates(protected by clear cover glass).

This is a must for welding or cutting, (and chipping) to protect the

eyes from avoid oily grasy clothing. A spark may ignite them. Hot

metal such as electrode stubs and workpieces should never be