Artila Aport-214PG Hardware Manual - Page 9

Browse online or download pdf Hardware Manual for Server Artila Aport-214PG. Artila Aport-214PG 10 pages. Freertos programmable device server

Print Page

3. Pin Assignment and Definition

3.1

The LED provides the Aport-214PG operation information described as follow:



RDY: Ready LED keeps ON when Aport-214PG software is ready for operation.



PWR: Power LED keeps ON if power (+9VDC to +48VDC) is correct.



DO0 / DO1: These LEDs indicate the relay status. When the coil of relay is

energized, the LED will be ON.



LAN: Link and Activity LED will turn ON when the Ethernet cable is connected.

When there is network data traffic, this LED will flash.



STATUS: User defined, control by software/GPIO



RS-485 (D1/D2): This LED is dual color and it indicates the serial data traffic of RS-

485 respectively. The Yellow LED stands for receiving data and Green LED means

transmitting data.

3.2

Power Input

Connecting +9 ~ +48VDC power line to the Power in terminal block(V+/V-). If the power

is properly supplied, the Power LED will keep solid green and a beep will be heard.

V+: DC power + in

V-: Power ground

ARTILA

Aport-214PG Hardware Guide