Artillian 1UTVTB Installation & Owner's Manual - Page 3

Browse online or download pdf Installation & Owner's Manual for Racks & Stands Artillian 1UTVTB. Artillian 1UTVTB 8 pages. Artillian utv bed mounted tool bar

Print Page

MOUNTING CONFIGURATION OVERVIEW

This kit is designed to accommodate many sizes and shapes of

vehicle beds. Per the illustrations on this page, the brackets

may face inward or outward, attaching to the inside or outside

face of your vehicle bed.

Included in the kit are 1" square tube clamps for attaching to

vehicle beds that have exposed 1" square tubing (most

Kawasaki beds). Also included are heavy duty backer plates for

bolting through thin sheet metal beds.

Before installation, hold the mounting brackets up to the

vehicle bed and determine the desired location of the brackets.

Some considerations are: bed length, features on the bed, and

the width of the user's Tool Bar Accessories. Ideally, the

mounting brackets will be spaced at least 20" apart and the

tube will be centered on the brackets. In order to mount multiple

accessories at one time, the accessories may need to

"straddle" one or both of the mounting brackets. This should be

considered prior to drilling the vehicle bed, if drilling is required

for your application.

WARNING

It is the user's responsibility to ensure that installation of this

product does not affect the functionality of the vehicle ROPS,

tires, or any other safety feature of the vehicle. Failure to do so

may result in injury or death. Due to the many variations

between UTV models, the UTV Mounted Tool Bar or some of its

quick removal accessories may interfere with dump bed

operation, fender flares, or tires. If necessary, the quick-release

Cam Lever Latches on the ROPS Mounted Tool Bar accessories

allow a given accessory to be quickly removed and relocated to

a non-interfering location.

Artillian strives to continuously improve our products. As such, the

actual product may vary from the images shown throughout this

manual.

Figure 1 shows the tool bar mounted to a 1" square vehicle bed

rail, facing outwards. This is the preferred orientation for

hanging chainsaws and long handled tools on the tool bar. This

orientation is also required if adding the Artillian UTV Mounted

Tool Rack.

2. Figure 2 shows the tool bar mounted to a 1" square vehicle bed

rail, facing inwards. This offers the most protection for installed

tool bar accessories, with the tradeoff of taking up bed space.

Chainsaws and long handle tools may not be installable on the

tool bar in this orientation.

3. Figure 3 shows a toolbar installed on a vehicle with flat metal

bed sides, facing outwards.

4. Figure 4 shows a toolbar installed on a vehicle with flat metal

bed sides, facing inwards.

1" Square Vehicle Bed Rail

(Driver's Side)

Fig. 1

Mounted to Vehicle Bed Rail, Facing Outwards

1" Square Vehicle Bed Rail

(Driver's Side)

Fig. 2

Mounted to Vehicle Bed Rail, Facing Inwards

Flat Vehicle Bed Side

(Driver's Side)

Fig. 3

Mounted to Flat Vehicle Bed, Facing Outwards

Flat Vehicle Bed Side

(Driver's Side)

Fig. 4

Mounted to Flat Vehicle Bed, Facing Inwards

3 of 8