Artillian 1RMTB Installation & Owner's Manual - Page 2

Browse online or download pdf Installation & Owner's Manual for Tractor Accessories Artillian 1RMTB. Artillian 1RMTB 7 pages. Rops mounted tool bar

Print Page

MOUNTING CONFIGURATION OVERVIEW

This kit is designed to accommodate many

sizes and shapes of vehicle ROPS (Roll-Over

Protective Structures). Per the illustrations on

this page, the brackets may face inward or

outward, and may be attached to the inside or

outside face of your ROPS.

Before installation, hold a ROPS bracket up to

the vehicle ROPS and determine the desired

orientation of the bracket. Some considerations

are: ROPS width, ROPS angle, features on

ROPS (ex.: lights, hinges, etc.), and the width of

the user's implement (s).

WARNING

It is the user's responsibility to ensure that

installation of this product does not affect the

functionality of the vehicle ROPS or any other

safety feature of the vehicle. Failure to do so

may result in injury or death.

1. Figure 1 shows a ROPS bracket mounted to the

inside surface of a vehicle ROPS with the bar

mounting surface facing outwards. The bracket can

be flipped so that the bar mounting surface is

facing inwards.

Figure 2 shows a ROPS bracket mounted to the

outside surface of a vehicle ROPS with the bar

mounting surface facing inwards. The bracket can

be flipped so that the bar mounting surface is

facing outwards.

Figure 3 shows a full-width illustration of ROPS

brackets mounted to the outside surface of a ROPS

with the bar mounting surfaces facing inwards. The

ROPS brackets could also be mounted to the

inside surface of the ROPS (not shown) or flipped

so that the bar mounting surfaces are facing

outwards (not shown).

Figure 4 shows a completed installation on an

angled ROPS with the ROPS brackets mounted to

the inside surface of the ROPS. The ROPS

brackets could also be mounted to the outside

surface of the ROPS (not shown).

Fig. 1 (Bracket on inside of ROPS, facing outwards)

Fig. 2 (Bracket on outside of ROPS, facing inwards)

Fig. 3 (Brackets shown outside of ROPS)

Fig. 4 (Angled ROPS, Brackets shown inside of ROPS)

2 of 7