djpower V-3 User Manual - Page 5

Browse online or download pdf User Manual for DJ Equipment djpower V-3. djpower V-3 20 pages. Spark machine

djpower V-3 User Manual
1.4

Disclaimer

The information and specifications contained in this User Manual are subject to change without notice.
DJPOWER assumes no responsibility or liability for any errors or omissions and reserves the right to revise
or to create this manual at any time.
Copyright © 2018 DJPOWER. All rights reserved.
1.5

Safety Notes

Please read the following Safety Notes carefully before working with the product. The notes include
important safety information about installation, usage, and maintenance.
1.5.1

Personal Safety

Always connect the product to a grounded circuit to avoid the risk of electrocution.
During heating up and operation, the housing will be scalding hot. Do not touch.
The product is very hot during operation and it remains hot for a long time after operation has
stopped. Do not touch the product's nozzle.
Keep a minimum distance of 6.6 ft. (2 m) from the machine to the nearest human or flammable
material. The output spark from the nozzle must be in the air but not reaching any object. And mind
the falling residue after the spark.
Make sure that children, unauthorised people and animals do not obtain access to the machine.
The operation noise is lower than 80 dB without harm to ear. No need to wear ear protection when
close to the working machine.
Eye protection is always required when operate the machine closely.
1.5.2

Mounting and Rigging

For safety reasons, we do not recommend mounting the product in any capacity. Operate the
product while it is on the ground only.
The product is for indoor use! To prevent risk of fire or shock, do not expose the product to rain or
moisture. Optional waterproof case is available for operating in rain.
CAUTION: When transferring product from extreme temperature environments, (e.g. cold truck to
warm humid ballroom) condensation may form on the internal electronics of the product. To avoid
causing a failure, allow product to fully acclimate to the surrounding environment before connecting
it to power.
Do not mount the product on a flammable surface (linoleum, carpet, wood, paper, carton, plastic,
etc.).
Do not use in a confined space. Always install the product in a location with adequate ventilation, at
least 20 in (50 cm) from adjacent surfaces.
Be sure that no ventilation slots on the product's housing are blocked.
1.5.3

Power and Wiring

Always make sure that the voltage of the outlet to which you are connecting the product is within the
range stated on the decal or rear panel of the product.
DJPOWER
2