djpower XUN V-5 User Manual - Page 14

Browse online or download pdf User Manual for DJ Equipment djpower XUN V-5. djpower XUN V-5 17 pages.

Print Page

V-5 USER MANUAL

•

Use Dry Chemical Extinguishers once lighting a fire. DO NOT use Water-Type Extinguishers, Foam Extinguishers or

Carbon Dioxide Extinguishers.

TECHNICAL INFORMATION

7.1

The V-5 requires regular maintenance in order to maintain optimum performance. However, some steps are needed in

order to clean and maintain the product for maximum usage. The recommended procedure is as follows:

After a period of using, check if there is any consumable tuberculation inside the nozzle. Do necessary cleaning up if

there has some, or it may affect spark performance, even damage the machine.

Test-run your DJPOWER@ V-5 on a monthly basis to achieve the best performance.

7.2

Storage

7.2.1

Machine Storage

Before storing the machine, empty the storage bin ， clean it as described in the

"Maintenance" section. And keep the machine in dry cool place.

Empty the storage bin:

•

Remove the power cord from mains power, and allow unit to cool down.

Empty the storage bin through feed port by inverting the machine.

•

Run the machine to generate Spark till out of Spark Seed, or run Consumable Cleaning Up procedure (Safety

channel, channel 2) to completely clear remaining Spark Seed inside the nozzle.

Refer to "DMX Channel Assignments and Values" chapter to for more information.

Spark Seed would easily get damp in the open air and deliver poor spark effect. Storing damp Spark Seed

in the machine storage bin will do harm to machine and cause clogging.

7.2.2

Spark Seed Storage & Recycling

7.2.2.1

Sealed Spark Seed Storage

Spark Seed should be stored in a cool, dry place, vacuum packed in resealable foil bags, and protected from

moisture, heat, hot surface, open fire and other ignition sources.

7.2.2.2

Spark Seed Recycling

Store the unfinished Spark Seed in the Recycling Tube with the Funnel. Keep it sealed and away from moisture.

7.3

7.3.1

Device Error Description

When error happens, device will stop working and heating system shuts off automatically. LCD shows corresponding

error code.