djpower DSK-3000 User Manual - Page 6

Browse online or download pdf User Manual for Fog Machine djpower DSK-3000. djpower DSK-3000 12 pages.

Print Page

3. Usage / Control

Take out the unit from the shipping package; make sure all the foams and plastic padding are

removed, especially in the nozzle areas.

Place the unit on a flat surface and remove the tank cap.

Fill the tank with high-quality, water-based fog liquid recommended by the distributor. Any

other types of liquids may cause spraying water or serious clogging problem. After infusing

liquid, seal the tank with cap. Be careful that the liquid doesn't exceed the maximum level. Do

NOT OVERFILL.

Close the Tank and assure yourself, that no liquids came inside the Machine. If you feel

uncomfortable it is also possible to take the tank out of the machine before filling it up. Liquids

inside the machine can cause short circuits and could cause danger for your own safety.

•

Connect the Power Cord (delivered with the machine) to a Power Supply according to the

technical Data of the device. Please make sure the device is sufficiently grounded.

•

Turn on the machine by the Power switch on the back.

•

The switch will light up red when the machine is on Power.

•

You can read "Heating up" on the display now.

•

The machine will need about 9 minutes to heat up. When the heating up is done the display

will show "Ready to fog".

6 / 12