Custom Crimp SM 300 Manual - Page 11

Browse online or download pdf Manual for Power Tool Custom Crimp SM 300. Custom Crimp SM 300 19 pages. Hose skiver

Print Page
Custom Crimp SM 300 Manual
HOW TO ADJUST SKIVING DEPTHS ON ID TOOL
1. Place the hose on to mandrel and slide the hose up to the
cutting insert.
2. Loosen the set screw that locks insert into place (as shown).
3. Adjust the depth set screw to inner diameter wire.
4. Skive the ID of a hose to check how close to the wire you are.
5. To make a small adjustment continue to adjust the depth of
insert to hose and fi tting manufacturer's requirements.
6. Make sure that all set screws are tight.
11