Custom Crimp BE Series Operator's Manual - Page 5

Browse online or download pdf Operator's Manual for Tool Storage Custom Crimp BE Series. Custom Crimp BE Series 8 pages. Electronic test bench

Print Page

TEST PROCEDURE

After the system initializes and

loads, the "Begin Test" screen

will appear.

Enter the max test pressure.

Keypads will pop up for set-

tings not indicated by arrows as

shown on the next screen.

Enter the number of times that

the test is to be run.

If test parameters and test

setup is correct, start test.

Press New Test to initiate a test

or Repeat Test to repeat the

previous test.

Set the time for the hose to be

held at test pressure.

Enter the delay time between

test cycles.

Test progress is shown.

Page

Press the pressure button to

bring up the pressure adjust-

ment keypad screen.

Enter the minimum pressure

allowed during the test cycle.

Review test parameters prior to

running test.

Test results are shown and the

print option is available.