Custom Dynamics ProBEAM PB-TL-INT-BW-S Installation Instructions

Browse online or download pdf Installation Instructions for Automobile Accessories Custom Dynamics ProBEAM PB-TL-INT-BW-S. Custom Dynamics ProBEAM PB-TL-INT-BW-S 2 pages. Integrated led taillight

We thank you for purchasing the Custom Dynamics® ProBEAM® Integrated LED Taillight! Our LEDs offer maintenance
free service and higher visibility. Our ProBEAM® product line utilizes the latest technology and automotive grade
components to ensure the highest level of reliable service. Custom Dynamics® offers one of the best warranty pro-
grams and customer support in the industry. If you have any questions during the installation of this product please
call us at 1(800) 382-1388.
Part Number:
RED:
PB-TL-INT-TW-R PB-TL-INT-BW-R PB-TL-INT-NW-R
SMOKED: PB-TL-INT-TW-S PB-TL-INT-BW-S PB-TL-INT-NW-S
Package Contents:
- ProBEAM® Integrated Taillight Assembly (1)
- Nylon Washers (1 pair)
- Gasket (1)
Fitment:
1999-2013 Harley-Davidson® Sportster models
(Except XL1200N, XL1200X, XL1200V or XL883N); 2014-
2019 XL883L & XL1200T, 1999-2017 Dynas® (Except 2009-
2017 FXDB, 2010-2017 FXDWG), 1999-2017 Softails®
(Except FXS, FLS, FXSB, FXSBSE, FLSTN, FLSTNSE, FXCWC, 2010
FLSTSE2), 2018-2020 Heritage Classic (FLHC), 1999-2013 Electra
Glide, Ultra Classic, Ultra Limited models (including CVO™), Road
King Classic (FLHRC), Road Glide Ultra (FLTRU), Road Glide Ultra
CVO™ (FLTRUSE), 1999-2009 Road Glide Standard (FLTR), 2006-
2009 Street Glide (FLHX), 1999-2020 Road King® (FLHR), 2014-
2015 Limited CVO™, 2015 Road Glide® Ultra CVO™ (FLTRUSE),
2019-2020 Electra Glide® Standard (FLHT).
Replaces: OEM Squareback Taillight PN:68245-03
Not Recommended for: inverted installation on
01 FXDWG2, 02 FXDWG3, 99-08 FXDWG, 2008-2013 FXDF, 99-09
FXSTB, 08-11 FLSTSB, 99-10 FXSTC, 99-07 FXST, 99-06 FXSTS, 09-
12 XR1200 & XR1200X
Note: Not compatible on Trike models, on models with Run/
Brake/Turn module installed or on CanBus models with Brake/
Turn BCM programming
ATTENTION
Please read all Information below before Installation
DO NOT OVERTIGHTEN! Overtightening screws during installation can crack the
lens at the screw holes and void the warranty.
Do NOT use thread lock such as Loc-Tite™ with this product, it will weaken the
plastic at the screw holes causing cracks and will void the warranty.
Important: DOT & SAE Compliant run and brake. Integrated turn signals are in-
tended for use as auxiliary lighting only. Integrated turn signals are NOT intended
to replace any original equipment lighting installed on the vehicle and should not
be used for that purpose. This product must be wired so that it does not interfere
with any original equipment lighting.
Questions? Call us at: 1 (800) 382-1388 M-TH 8:30AM-5:30PM / FR 9:30AM-5:30PM EST
ProBEAM® Integrated LED
Taillight Installation Instructions
US Patents: D807545, D807546, D808050.
Installation:
1. Remove stock taillight by removing the 2 Phillips
head screws, save for use with the new LED tail-
light.
2. Unplug the taillight connector from the terminal
block in the taillight base.
3. Make sure the new ProBEAM® LED taillight
base is clean and free of debris.
4. Remove white paper from back of gasket and
apply gasket to the new ProBEAM® LED taillight
assembly. (Note: Gasket on the new unit will
need to make clean contact with the taillight
base all the way around.)
5. Locate the left and right 2 pin turn signal con-
nectors. Press down release tab on the top of
connector to unplug both. (See Figure 1 on
Page 2)
Custom Dynamics®
China Patent: ZL201730257957.9
05-2020