DK Digital CDB-400 Owner's Manual - Page 9

Browse online or download pdf Owner's Manual for Recording Equipment DK Digital CDB-400. DK Digital CDB-400 13 pages. Portable cd radio recorder

Print Page

Cassette operation

Do not use C-120 tapes or very cheap tapes. This may lead to malfunctioning and tape

spillage. Before inserting a tape please ensure that the tape reels run smoothly and that

there are no tape loops. Otherwise this might result in tape spillage.

The tapes are equipped with plastic clips which can be removed to secure recordings against

rerecording or erasing (see Fig.). The resulting deepening may be covered with adhesive

tape to rerecord the tape.

ATTENTION!

When you have removed the erase protection, the record

button will be locked and cannot be pressed! These plastic

clips are also removed in commercial music tapes.

Play Tapes

Put the function switch into the position TAPE - POWER OFF.

Press the button

tape with tape opening upwards into the cover bracket. The full tape reel should be on

the right side.

Carefully close the cover by slighting pressing down the cover of the cassette

compartment. Press the play

If you want to interrupt the playback for a short time only, press the

press this button again, the playback will continue.

You may discontinue the playback by pressing the

Fast Forward and Rewind

You can run forward and rewind the stopped tape. Use the

the

button for fast rewind. When you have reached the desired tape position, press the

button to stop the process. Never use the fast forward or rewind functions during

playback. This may cause damage to the tape.

Record Tapes

Put a cassette into the compartment: The side to be recorded must be visible from the

outside. The full tape reel has to be on the right side. Any previous recordings will be

overwritten. Please keep in mind that the first centimetres of the tape material are not

recordable.

You need not pay attention on the level control – the recording automatics will regulate the

best possible level control. The volume control has therefore no impact on the recording.

Select the sound source you would like to record (CD or RADIO). Prepare the CD

component or the radio for playing in accordance with these instruction.

Press the Pause

place. In order to start recording, press the PAUSE button again to release it.

The

button discontinues the recording.

Automatic Tape Stop

When in the process of recording or playback the end of the tape is reached, the tape stops

automatically and the relevant button is released.

. The cassette compartment opens, and you can insert a recorded

button . The tape will be played.

button, then the record

button.

button for fast forward and

button. The

button . If you

button will also click into