DK Digital CDB-650 Owner's Manual - Page 6

Browse online or download pdf Owner's Manual for Recording Equipment DK Digital CDB-650. DK Digital CDB-650 12 pages. Portable cd/mp3 radio recorder

Print Page

Power supply

You can operate this device with the mains voltage of AC230V~ / 50 Hz, or with battery

power.

Mains operation

Connect the mains cord to a properly wired wall outlet with a voltage of AC230V~ / 50 Hz

and to the mains socket on the rear panel of the unit. Now the device is operational.

Battery operation

Open the battery compartment on the bottom side of the unit. Insert 6 x 1.5V UM-1 "D" size

batteries (not supplied) into the compartment according to the insertion instructions in the

battery compartment. Observe the correct polarity of the batteries, as otherwise the device

may suffer damage. Due to their longer service life, we recommend you to use alkaline

batteries. Close the compartment again. Now the device is operational.

Batteries must not be thrown in the household waste. Please take used

batteries to the respective collecting points or take them there where

you have bought the new ones. Do not throw batteries into the fire.

Move the FUNCTION switch to choose the desired function.

"CD/MP3" for CD/MP3 playback, or

"RADIO" for radio reception, or

"TAPE" for cassette operation.

To switch the unit off, move the FUNCTION switch to the "TAPE" position.

With the VOLUME controller you can set the volume as requested. Turn the controller

clockwise to increase the volume. Turn it counter clockwise to lower the volume.

Headphone Operation

You can connect a headphone to the PHONES jack at the rear end in the device using a

3.5mm jack plug. This deactivates the build-in speakers.

X-BASS

If you would like to boost the low frequencies, press the X-BASS button. Press the button

again to deactivate this function.

Be careful with regard to your hearing. A too high volume may lastingly impair the

hearing ability of your ears.