Altronix eBridge1PCTX Installation Manual
Browse online or download pdf Installation Manual for Receiver Altronix eBridge1PCTX. Altronix eBridge1PCTX 4 pages. Ip and poe+ over coax solution ebridge1pcrx receiver and ebridge1pctx hardened transceiver kit
Also for Altronix eBridge1PCTX: Installation Manual (4 pages), Installation Manual (4 pages)
Print Page
eBridge1PCRM
IP and PoE+ over Coax Receiver
eBridge1PCRM is a single port EoC Receiver which transmits data and passes power over coax cable.
eBridge1PCRM passes PoE/PoE+ up the coax to an eBridge1PCT, eBridge1PCTX or eBridge1ST
transceiver. The transceiver, in turn, delivers that PoE compliant power to an edge device/camera.
This plug and play unit facilitates system upgrades from analog to IP utilizing existing legacy Coax
and eliminates the costs and labor associated with installing new network cabling. Data transmission
and power over the Coax is possible up to 500m in comparison to 100m Ethernet distance (CAT5e). A
maximum range from head end to the edge device/camera is 700m, taking into consideration that up to
100m of structured cable may be deployed from the receiver to the network switch and the transceiver
to the edge device/camera.
Agency Listings:
• UL/CUL Listed for Information
Technology Equipment (UL 60950-1).
• CE approved.
• C-Tick compliant.
Compatible Transceivers:
• eBridge1PCT: PoE compliant transceiver.
• eBridge1PCTX:
PoE/PoE+ compliant transceiver.
• eBridge1ST:
PoE/PoE+ compliant mini transceiver.
Input:
• 24VDC/110mA or 24VAC/200mA.
Ethernet:
• Connectivity: RJ45, auto-crossover.
• Wire type: 4-pair CAT5 or better
structured cable.
• Distance: up to 100m.
• Speed: 10/100BaseT, half/full duplex,
auto negotiation.
PoE compliant to IEEE 802.3af (15W) and
PoE+ compliant to IEEE 802.3at (30W)
delivered to camera by eBridge transceiver.
• Throughput is rated to pass 25Mbps of data at
distances up to 500m with proper headend
equipment which supports Megapixel, HD720,
HD1080.
Coax:
• Distance: up to 500m for power delivery of coax.
• Connectivity: BNC, RG-59/U or similar.
LED Indicators:
Blue LED - Coax link connection.
Green - PoE ON.
Green - Power ON.
Yellow and Green LED (RJ45) IP Link status,
10/100Base-T/active.
eBridge1PCRM
Installation Guide
PLUS
Overview:
Features:
Environmental:
• Operating Temperature:
-20ºC to 49ºC (-4ºF to 120.2ºF).
• Storage Temperature:
-30ºC to 70ºC (-22ºF to 158ºF).
• Relative humidity: 85%, +/-5%, non-condensing.
• Operating Altitude: -304.8 to 2,000m.
Functions:
• Auto detection and protection of legacy
non-PoE cameras/devices.
Applications:
• Retrofit digital IP cameras in an analog CCTV
installation.
• Works with Megapixel, HD720, HD1080, and
VGA (SD) cameras.
• Extend Network link distance in an industrial
environment.
• Upgrade deployed CCTV Coax to a digital
network in Retail, Hospitality, Arenas, Casinos,
Airports, Schools, Hospitals, Transportation, etc.
Mechanical:
• Lightweight molded compact insulated housing.
• eBridge1PCRM dimensions:
3.5" x 4.375" x 1"
(88.9mm x 111.1mm x 25.4mm).
• eBridge1PCTX/1PCT dimensions:
2.5" x 3.8" x 1" (64mm x 97mm x 25mm).
• eBridge1ST dimensions:
2.27" x 2.645" x 1.12"
(57.7mm x 67.2mm x 28.4mm).
Rev. 032113
I.T.E. 43KC
Z1409
- 1 -