Altura Photo AP-FLS-UNV1 User Manual - Page 4

Browse online or download pdf User Manual for Camera Flash Altura Photo AP-FLS-UNV1. Altura Photo AP-FLS-UNV1 8 pages.

Print Page

1. Installing the batteries

Open the battery cover

Slide the cover to the

bottom of the flash and

then pull up.

• Only use AA/LR6 Alkaline batteries or if you prefer rechargeable batteries you can

use AA Rechargeable Ni-MH.

• When replacing batteries use a brand new set from the same manufacturer.

2. Attaching the flash

Attach the flash

Slip the mounting foot

all the way into the

hot shoe of the

camera.

Remove the batteries when the flash is not being used.

5. Flash Operation

1. Turning on the power

Install the batteries

Make sure the + & - battery

contacts are inserted

correctly as shown in the

battery compartment.

Secure the flash

Turn the locking ring to

secure the flash on the

camera.

Close the battery cover

Close the battery

compartment and slide

the cover up until it

clicks.

Remove the flash

Turn the locking ring in the

opposite direction and pull

the flash from the camera.