DK-TEC AMC130 Original User Manual - Page 5

Browse online or download pdf Original User Manual for Trimmer DK-TEC AMC130. DK-TEC AMC130 10 pages.

Print Page
DK-TEC AMC130 Original User Manual
1. Before attaching the hedge trimmer to the towing unit, ensure that it is standing securely on a
solid and watered surface. (It is important that you also take the mower off the pulling unit on a
solid and level surface so that it can be easily attached the next time it is used). Make sure that
the mower is properly mounted and securely fastened to prevent the mower from moving when
it is lifted.
2. Before or while operating the towing unit, in connection with connecting the mower, make
sure that there are no people too close to the work area. Make sure all people keep a good
distance. Always use caution when operating or attaching the mower to the towing unit.
3. Always ensure that the towing unit is braked when mounting the mower.
4. If it is necessary to inspect or adjust the mower when it is connected to the towing unit,
place some suitable supports under the towing unit
to avoid any lowering of the mower. Make sure all supports are on solid and level ground.
5. The mower must always be on solid and level ground when it needs to be adjusted or repaired.
6. Never work, adjust, maintain the mower while it is in use. Before starting to work,
adjust or maintain the machine, the mower must be stopped and the drive unit motor
must be switched off.
7. Before leaving the driver's seat of the towing unit, the engine must be switched off.
8. When transporting, the cutting head must be kept in a vertical position
9. Always use the mower with care. Use it only for what it is intended for. Do not overload
the mower as this may damage the machine or the pulling unit.
10. When removing the mower from the towing unit, the machine must be parked in a place
where it is not a danger to others.
11. Make sure to regularly maintain the mower so that you get the most out of the machine and
that it is always safe to work with.
12. Always respect the safety instructions.

3. General instructions

3