DK-TEC HNAMRMC190 Original User Manual - Page 6

Browse online or download pdf Original User Manual for Trimmer DK-TEC HNAMRMC190. DK-TEC HNAMRMC190 10 pages.

DK-TEC HNAMRMC190 Original User Manual
4. Connecting the hedge trimmer
When the machine is on a stable surface:
1. Mount the hedge trimmer
A) Mount the arm using the mounting brackets. The mower must turn with the cutting head to
the right (when looking in the direction of travel).
2. Connect hydraulic hoses to the hydraulic outlets on the towing unit.
Disconnecting the hedge trimmer
AFTER USE
1. Turn off the mower and make sure the blades have stopped before disconnecting the machine.
2. Place the machine on the ground.
3. Make sure the system is depressurized before disconnecting hydraulic hoses.
4. Switch off the towing unit and apply the parking brake.
5. Disconnect the machine from the towing unit and ensure that it cannot tip over.
6. If necessary, rinse the machine with water, but make sure to lubricate all bearings and
blades afterward.
6. Transportation of the hedge trimmer
Operation of the machine on the way
Before using the machine on public roads, you must familiarize yourself with the various laws and
regulations in the area where the machine is to be used.
- Always comply with the rules and laws when driving the machine!
When transporting the machine:
Place the cutting head in a vertical position.
If the mower has been moved sideways, it is returned to its normal position again.
Refit the safety cover
In general, the towing unit must move with the traffic.
Always use traffic signs and make sure they are correctly positioned in relation to the work
to be done. Respect the traffic and make sure not to block others on the road.
Make sure that cyclists and other vehicles know in good time that they have to go around.
Comply with the laws regarding lights on the towing unit.
4