Artistic Licence netLynx quad User Manual - Page 5
Browse online or download pdf User Manual for Gateway Artistic Licence netLynx quad. Artistic Licence netLynx quad 12 pages.
Print Page
DMX512 Wiring
XLR Pin
Function Colour RJ45
(convention)
1
COM
2
DMX -
3
DMX +
DMX Inputs
Any of the DMX ports can be set to receive
DMX and generate either Art-Net or sACN.
Configuration is achieved with either DMX-
Workshop or the web browser.
When receiving DMX, the LED port indicator
illuminates to show that data is being received.
Universe Addressing
The universe (Port Address) is used to uniquely
identify the DMX data on the network.
Art-Net allows universe numbers in the range
0-32767.
sACN allows universe numbers in the range
1-65535.
For the avoidance of cross-protocol
confusion, users are advised to number
universes from 1.
Configuration
Configuration is achived via the internal web
server or via DMX-Workshop.
In order to restore the product to its factory
default state, hold down the reset button
(under the terminal guard) and cycle the
power.
netLynx quad User Guide
Cable
Pin
Colour
Black 7 &
White/
8
Brown
&
Brown
Blue
2
Orange
Red
1
White/
Orange
Web-Server
To configure netLynx quad via the internal
web-server, either type in the IP address of
the product or, if your web-browser supports
NetBios, then enter the name: netLynxquad.
To find the IP address, use DMX-Workshop.
The home screen is shown on the next page.
For an explanation of the settings, please see
below.
IP Settings
The IP settings for the product are displayed
in the top section of the screen. The Edit
control allows the static IP, subnet mask and
gateway to be configured. DHCP operation
can be selected via DMX-Workshop.
The indicator meanings are as follows:
Online: Green = live connection between
y
browser & product; Red = connection lost
Power: Green = powered; Flashing
y
green = Identify; Red = Fault
Net: Yellow = Link; Green = Art-Net or
y
sACN activity
Port Settings
The settings for each DMX port can be
configured via the web-browser using the
following columns:
Port: The DMX port number
y
Input: Tick to set as DMX input
y
DMX: Green shows changing data
y
RDM: Tick to enable RDM
y
Delta: Tick to enable delta transmission
y
(DMX frames are only sent when
network data changes)
Universe: Set the universe (port address)
y
for this output
Rate: Sets the DMX refresh rate:
y
- High = 24 ms frame time
- Medium = 32 ms frame time
- Slow = 48 ms frame time
Protocol: Select either Art-Net or sACN
y
control over this output
Page 5