Alula RE206M Manual

Browse online or download pdf Manual for Accessories Alula RE206M. Alula RE206M 2 pages. Tilt sensor honeywell & 2gigcompatible

Print Page

Resolution Compatibles

Tilt Sensor

is a full-featured security transmitter typically

used to sense the tilt of overhead garage doors and

windows. It will alarm when the sensor is tilted more

than 45 degrees.

Features

• Industry-leading wireless range and battery life

Enroll

by placing the panel into wireless enrollment

mode and then sending an enrollment signal from the

sensor.

Sending an Enrollment Signal

Remove the battery tab and cover to trip

tamper. Select desired Loop:

• Loop 1: Tilt Alarm when tipped to vertical

• Loop 2: Tilt Alarm when tipped to flat

• Loop 3: Not used

• Loop 4: Tamper

Install

by mounting the sensor to the

inside of a door or window using the

mounting screw locations. For garage

door installations, the sensor should be

mounted to the top panel of the overhead

door. This ensures that the sensor

closes only when the door is fully

closed, and is best for RF range.

Tilt Detection

sensor exceeds a 45 degree angle.

If the sensor rotates further than

135 degrees, it is likely to remain

in a non-alarm state. For best

results, the sensor should rotate

within 90 degrees to ensure an

alarm state occurs.

Use the panel installation guide to verify proper system setup.

RE206M Tilt Sensor

Honeywell & 2GIG Compatible

occurs when the

Mounting

Screw

Holes

Cover-Securing

Screw Hole