Alula RE657WF Manual

Browse online or download pdf Manual for Touch Panel Alula RE657WF. Alula RE657WF 12 pages. Flat mount touchpad
Also for Alula RE657WF: Manual (12 pages)

Print Page

Connect Family

he RE657WF Flat Mount Touchpad i

the Connect+ security system. Designed to cover unsightly marks, the Flat

Mount Touchpad is well suited for takeover situations. It is AC powered and

communicates with the panel wirelessly.

Features

• Vibrant 7" Android™ tablet display

• Provides local control of security and automation

functionality

• Expanded footprint for covering marks left by

pre-existing keypads

• Encrypted, Connect+ enabled, battery-backed

Wi-Fi™ connection

Installation Overview

1. Confirm the panel has a Wi-Fi DeviceLink card installed.

Installing the Wi-Fi DeviceLink Card

• Disconnect the panel's AC power and backup

battery.

• Install the Wi-Fi DeviceLink card in Slot 2 by

carefully aligning the nylon retention posts and

the 8-pin connector while pushing the card

firmly until all posts are fully seated.

• Reconnect the panel's AC power and backup

battery.

• Verify the Wi-Fi card LEDs are on.

2. Verify signal strength at the desired location before mounting it permanently.

Verifying Signal Strength

1. Make sure the panel is powered and the Wi-Fi DeviceLink card is installed.

2. Power up the Touchpad.

3. Select the "Connect" option to see the available networks. If the "Connect" option is

not available, press "Setup" then "Factory Default".

4. If the signal strength displayed is less than 35, relocate Touchpad or Connect+ panel. If

neither options are available, install an RE621 Touchpad Range Extender.

RE657WF Flat Mount Touchpad

Connect+

Encrypted

™

s an intuitive interface for controlling

AC Power

Input

Slot 2

Backup

Battery