Alula RE667W-R Manual - Page 2

Browse online or download pdf Manual for Touch Panel Alula RE667W-R. Alula RE667W-R 12 pages. Slimline touchpad

Print Page

By default the Touchpad network list will show Connect+ and BAT-Connect access points. To view all

networks in range tap the "Show all networks" button at the bottom of the network list.

4. Mount the Touchpad. Refer to section "Touchpad Mounting Options" for mounting instructions.

5. Enroll the Touchpad by pressing the enroll button on the side of the panel until it beeps once

and then select the desired network.

Note: If connecting to a home network, enter router credentials at the Touchpad. After a

connection is established, the Touchpad will discover all devices on the network. Select the

desired panel. After selecting the desired panel, the Touchpad will progress through stages of

discovery and authentication. Upon success it will show the DISARMED screen. If the wrong panel

was selected, press the "Restart"button in the side menu.

Troubleshooting Steps if Enrollment Fails:

• Confirm the panel is disarmed and in wireless enrollment mode. A red light will flash

on the panel if in wireless enrollment mode.

• Check whether the panel is already full. The limit is four Touchpads. To confirm

number of Touchpads connected, log into your account.

• Tap the "Restart" button to try again.

6. If using cameras or user management features, you must log in to the Alula Cloud as the

account owner. To log in go to Settings and select Touchpad. Enter master code, then select Alula

Cloud. Sign in with Alula Cloud user name and password (note: internet access is required).

7. Test the Touchpad by arming and disarming the panel from the Touchpad.

72DF

9EF8