Artopex e-Motion User Manual - Page 8

Browse online or download pdf User Manual for Indoor Furnishing Artopex e-Motion. Artopex e-Motion 10 pages. Two-leg adjustable table

Print Page
Artopex e-Motion User Manual
Settings (cont'd)
Customized Height Display / Minimum & Maximum Height Range - 7SH
The HiB function allows you to customize the height of the surface displayed, for example, if the table is
placed on an elevated base or has a surface thicker than 1".
The "LiL" function allows you to define the minimum height that the surface can reach. The "LiH" function
is used to define the maximum height that the surface can reach. These functions allow, for example, to
limit the movement of the surface in order not to come into contact with an obstacle in place.
Activate keypad by pressing any button. Press «M» button for 3 seconds, screen will display S--, then
release the «M» button and press the «up» arrow until code 7SH appears. Press «M» button to enter.
The screen will, by default, display Hib. To select the mode (Hib, LiL or LiH), use the up/down arrows
and press M to select.
*HiB: when selected, the screen will display the current height of the surface. Use the
arrows to define the desired height (customized) to display and press M to confirm.
*LiL: when selected, the screen will display the current minimum height of the surface.
Use the arrows to define the new minimum height desired and press M to confirm.
*LiH: when selected, the screen will show the current maximum height of the surface.
Use the arrows to define the new maximum height desired and press M to confirm.
Button Push Modes - 8Hc
In mode «001», you need to continuously hold the UP/DOWN buttons to move the work surface. Mode
«002» allows you to only press the UP/DOWN button once to move the work surface. Press any button to
stop the motion in mode «002».
Activate keypad by pressing any button. Press «M» button for 3 seconds, screen will display S--, then
release the «M» button and press the «up» arrow until code 8Hc appears. Press «M» button to enter;
screen will display 001. Use the UP/DOWN buttons to select mode and press the «M» button to
confirm selection.
1 800 378-0189
8