CUTRA Wondercutter Instruction Manual - Page 5

Browse online or download pdf Instruction Manual for Cutter CUTRA Wondercutter. CUTRA Wondercutter 10 pages.

Print Page
CUTRA Wondercutter Instruction Manual
on, retighten the setscrew and reset.
4. Once the setscrew is fixed, turn the power of the main body on and press the handle button on to
check that the Wondercutter is operational.
* If the Wondercutter is still not operational, clean the inside of transducer horn by following the
steps below. Also, cleaning or replacing the collet or the blade can return the Wondercutter to
full use.
1. Turn the main power off.
2. Remove the collect and the blade. Then clean the inside of transducer horn with q tips.
3. If the collet or the blade is contaminated or shows wear or damage, remove the contaminants or
replace them with a new collet or a new blade.
4.
Retighten the setscrew using a hexagon wrench.
Transducer horn
Collet
Blade
07 Product Maintenance
* Blade and Collet
1. In order to transmit the ultrasonic waves, fix the Wondercutter with the proper blade and collet.
* Ensure that the blade and fixtures are correctly attached.
2. A stain on the blade or on its fixture can cause heat, noise, and damage of the product.
* Ensure that the Wondercutter does not have a stain on the blade or other fixtures and replace when
necessary.
Changing the Blades
Insert the end of the new blade into the inside of the collet. Line up the holes of the blade setscrew and
the collet.
Changing the Collet
Line up the holes of the blade setscrew and the new collet.
Cautions
- Take care to line the blade in the proper direction. Only use Wondercutter blades.
- Non Wondercutter blades could cause the Wondercutter to function improperly or could cause
damage.
- The buzzer will beep and the Wondercutter will not operate if the blade is loose.
Other Notes
Check the blade and collet to make sure they are set correctly and tight.
Cautions
- Tighten the setscrew of blade.
- When the setscrew is not correctly adjusted, the blade can pop out and this may cause accidents and
cause of breakdown.