Aluprof DC1675 Programming Instructions

Browse online or download pdf Programming Instructions for Transmitter Aluprof DC1675. Aluprof DC1675 4 pages.

Print Page

PROGRAMMING INSTRUCTIONS FOR THE WALL TRANSMITTER: DC1675 AND DC1676

1. TECHNICAL SPECIFICATIONS

Power supply:

Frequency:

Operating temperature:

Average range:

It is compatible with all the DM series radio controlled motors and DC series control units from ALUPROF S.A. offer.

DC1675 - 1-channel:

Possibility to control 1 motor or 1 group of motors.

DC1676 - 5-channels:

Possible of control of 5 motors or 5 groups of motors.

Company reserves the tolerance of catalog data due the different conditions usage.

Activation of the "P2" button in DC1675, DC1676 wall transmitters is performed by a combination of both keys "MODE" and "K+".

2. DIAGRAM OF THE FRONT PANEL

K+

MODE

K-

In accordance with the provisions of the Directive of the European Parliament and of the Council 2012/19 / EU of 4 July 2012

on waste electrical and electronic equipment (WEEE), it is prohibited to place of used equipment together with other wastes,

marked with crossed out wheeled bin symbol. The users are obliged to transfer their used equipment to a designated collection

point for proper processing. The marking means, at the same time, that the equipment was put on the market after 13 August

2005. These legal obligations have been introduced to reduce the amount of waste generated from waste electrical and

electronic equipment and to ensure an appropriate level of collection, recovery and recycling. The equipment does not contain

any dangerous components, which would have any particularly negative impact on the environment and human health.

We reserve the right to any technical change.

Valid on 2022.02.09

PROGRAMMING INSTRUCTIONS FOR THE WALL TRANSMITTER: DC1675 AND DC1676

230 VAC / 50 Hz

433.92 MHz

~ -10°C - ~ +55°C

200 meters (in open space), 35 meters (inside buildings)

STOP

DOWN

Discharged battery

Week days

Roller shutter move - UP

Roller shutter move - down

Clock

Operating mode

Active channel