Aluprof AC 277-01 Programming Manual - Page 4
Browse online or download pdf Programming Manual for Control Unit Aluprof AC 277-01. Aluprof AC 277-01 8 pages.
Print Page
6. DIAGRAM OF THE FRONT PANEL
TIME SETTING
OPERATING MODE
OPERATING MODE
PHOTOCELL
SAFETY EDGE
PROGRAMMING
7. PROGRAMMING THE TRANSMITTER
Control unit works with two types of remote controls - 1) directional 2) impulse
DIRECTIONAL
With the control unit powered on,
press the "Learn" button.
IMPULSE
With the control unit
powered on, press
the "Learn" button.
"Learn" mode after 10 seconds of inactivity will close and no changes will be saved.
4
PROGRAMMING MANUAL FOR THE AC 277-01 CONTROL UNIT
The green LED
will flash slowly.
The green LED will
flash slowly.
Press the "TOP" button on
the transmitter. The green LED
will quickly flash 3 times.
Press the button twice
on the transmitter. The green LED
will quickly flash 3 times.
POWER SUPPLY
PROTECTIONS
RF COMMUNICATION
UP
STOP
DOWN
„-"
„+"
The transmitter has been
added.
The transmitter has been added.
We reserve the right to any technical change.
Valid on 2021.06.07