Cutting QG8C-A Quick Start Manual - Page 3

Browse online or download pdf Quick Start Manual for Cutter Cutting QG8C-A. Cutting QG8C-A 7 pages. Power pipe cutter

Print Page

clothing, and gloves away from moving parts. Loose clothes, jewelry, or long hair can be

caught in moving parts.

• Avoid accidental starting. Be sure switch is OFF before plugging in. Carrying tools with your

finger on the switch or plugging in tools that have the switch ON invites accidents

• Use safety equipment. Always wear eye protection. Dust mask, non-skid safety shoes, hard

hat, or hearing protection must be used for appropriate conditions.

Tool Use and Care

• Do not use tool if switch does not turn it ON or OFF. Any tool that cannot be controlled with

the switch is dangerous and must be repaired.

• Disconnect the plug from the power source before making any adjustments, changing

accessories, or storing the tool. Such preventive safety measures reduce the risk of starting

the tool accidentally.

• Store idle tools out of the reach of children and other untrained persons. Tools are

dangerous in the hands of untrained users.

• Check for misalignment or binding of moving parts, breakage of parts, and any other

condition that may affect the tool's operation. If damaged, have the tool serviced before using.

Many accidents are caused by poorly maintained tools.

• Use only accessories that are recommended for your tool. Accessories that may be suitable

for one tool may become hazardous when used on another tool.

• Keep handles dry and clean; free from oil and grease. Allows for better control of the tool.

Description

The QG8C-A and QG12C power Pipe Cutters are designed to squarely cut 2" to 8" or 2 1/2" –

12" steel pipe. The cutting action is in conjunction with a large diameter cutter wheel. The

cutter wheel is advanced to the pipe via a pivot arm. The pivot arm advances the cutter wheel

by utilizing a hydraulic cylinder and foot pump.

Specifications

Description

Motor

Max pipe thickness

Min pipe diameter

Max pipe diameter

Standard Equipment

• QG8C-A Cutter Frame

• Pipe Support

• General Purpose Cutting Wheel

• Tool case

QG8C-A

550W, induction

8mm

2 inch

8 inch