dlb AIJGO-22LCD Instruction Manual - Page 3

Browse online or download pdf Instruction Manual for Test Equipment dlb AIJGO-22LCD. dlb AIJGO-22LCD 16 pages. Personal grounding tester with lcd display and dual foot electrode

Print Page
ӹ
Tester for checking personal grounding before entering an ESD protected area
(EPA)
ӹ
Testing footwear system and wrist strap/groundable ESD smock system at the
same time
ӹ
Can be used to test a groundable ESD smock system
ӹ
Test result indication on LCD display, with LED light and sound
ӹ
Selectable test modes: Footwear sytem test only, or footwear system and wrist
strap/groundable ESD smock system combined test
ӹ
For indoor use only
The AIJGO-22LCD is an easy-to-use tester for checking personal grounding before
entering an ESD protected area (EPA). High load-bearing construction, it may be a
good choice if speed and security are important factors due to the large number of
entrances. Tester with LIGHT BAR system – such AIJGO products have a steel touch
button, the measured results are indicated by LED lights. The type of test can be
changed according to the entrance regulations: only footwear system test or the
combined test of the footwear system and wrist strap/groundable ESD smock
system. Thanks to the dual foot electrode, the tester simultaneously measures the
resistance of the right and left foot relative to the hand. After the test, the measured
values are displayed on the built-in LCD display. The tester can be connected to a
gate using the relay output (e.g. to a turnstile entrance gate, swing gate, etc.). It can
be installed on an entrance gate, table, wall or stand.
The tester is supplied with manufacturer's calibration certificate, dual foot electrode,
mounting plate and universal holder.
CE declaration
We declare that the AIJGO-22LCD product complies with the requirements of IEC
61340-5-1, ANSI/ESD S20.20 and Directive 2001/95/EC (General product safety).

ABOUT THE PRODUCT

3