ARTRED AR-55 Owner's Manual - Page 7

Browse online or download pdf Owner's Manual for Scrubber ARTRED AR-55. ARTRED AR-55 11 pages. Scrubber-dryer

Battery Coulombmete
The battery coulombmeter will display the power quantity of the battery. When
the battery is full of power, all indicator lights will be on. Along with the
consumption of the power quantity, the indicator lights will go out from the right
to the left. To prolong the life of the battery, do not let the indicator lights go out
to below the following power consumption.
Explanation:
To prolong the life of the battery, please ensure to charge the
battery after the total use time of the machine exceeds 30min.

Drainage of Water Tank

After each use, the waste water tank shall be drained and cleaned. The clean water
tank shall be periodically cleaned to remove any corroded parts. Carry the
machine to the drainage place, switch off the key of the power supply, and drain
the water according to the following drainage instructions: for safety: please stop
and place the machine on the level ground and shut down the machine and take
out the key before leaving or maintaining the machine.
Drainage of Waste Water Tank
1. Unscrew the drain pipe cover of the waste water tank counterclockwise and
take it down.
2. Open the cover of the waste water tank and flush the water tank.
3.
Dismantle and flush the floating filter screen in the waste water tank.

Battery Charging

Safety regulations for handling acid batteries
Park the scrubber securely before carrying out any work on the batteries.
Maintenance personnel : Batteries may only be charged, serviced or replaced
by trained personnel .The present operator manual and the manufacturer 's
instructions concerning batteries and charging stations must be observed
when carrying out the work.
Fire protection :
Smoking and naked flames must be avoided when working with batteries.
Wherever a scrubber is parked for charging there shall be no inflammable
material or operating fluids capable of creating sparks within 2 meters around
the scrubber.
The area must be well ventilated.
Fire protection equipment must be provided.
Protection against electric shock:
Battery has high voltage and energy.
Do not bring short circuit.
Do not approach tools to the two poles of the battery,which can cause the
sparkle.
Charging the battery
To charge the battery, the scrubber must be parked in a closed and properly
ventilated room. When charging, the tops of the battery cells must be exposed
to provide sufficient ventilation.
Do not place any metal objects on the battery.
Before charging, check all cables and plug connections for visible signs of
damage.
Before start and finish charging to make sure power is turn OFF.
It is essential to follow the safety regulations of the battery and charging
station manufacturers.
Charging step:
1.Place the charger and the machine in a well-ventilated place.
2.Turn off the power of the machine.
3.Insert the DC output terminal of the charger into the charging port of the
machine make sure the charger terminal engaged with charging port
completely.
4.Plug the AC power cord of the charger into a well-grounded power outlet.
5.When charging is completed, first unplug the ice dragon connected to the
AC power supply, and then unplug the output end of the charger from the
machine.
Warning!
Do not use dry cloth or fibre cloth to clean the battery,avoiding static to
bring the explosion.
Unfixing battery plug.
Cleaning with wet cloth.
Wearing glasses for protecting eyes rubber overshoes and rubber glove
Charger safety regulation
Do not disassemble the machine for repair or debugging without
authorization.Repair shall be done by professional personnel only.
To lengthen or replace the output cable is prohibited.
AC power socket shall match the plug of the charger and they are required to
be connected correctly.
Battery Disposal
Batteries may only be disposed of in accordance with national environmental
protection regulations or disposal laws.The
manufacturer's disposal instructions must be followed.
Batteries contain an acid solution which is poisonous and corrosive
Therefore , always wear protective clothing and eye protection when carrying
out work on batteries . Above all avoid any contact with battery acid.
Nevertheless, should clothing, skin or eyes come in contact with acid the
affected parts should be rinsed with plenty of clean water-where the skin or
eyes are affected call a doctor immediately. Immediately neutralise any
spilled battery acid.
Only batteries with a sealed battery container may be used.
The weight and dimensions of the battery have considerable affect on the
operational safety of the scrubber. Battery equipment may only be
replaced with the agreement of the manufacturer.