ARTRED AR50 Operation Manual - Page 12

Browse online or download pdf Operation Manual for Scrubber ARTRED AR50. ARTRED AR50 12 pages.

Print Page

Maintain Squeegee：

11.

Squeegee is an important part of floor washer. In the process of absorbing

water, because of the friction between adhesive tape and ground, it will wear

out. When the effect of absorbing water is not good, the following checks

should be made.

①Whether there is foreign matter in the rubber scraper;

( Prepare a towel and wipe the strip at any time)

②Whether there any debris blocking at the suction and hose connection；

( Remove the connection nozzle or remove the suction to clear the

blockage )

③Whether the angle between the scraper and the ground is suitable, it can be

adjusted by the squeegee universal wheel.

④Check the wear of the edge of the scraper. If the wear is severe and the

adjustment cannot be restored, the scraper strip can be used in reverse. If the

other side is worn, only the new strip can be replaced.

Normally configured is a common strip. If you are using it in a

heavily oily environment, please purchase a special strip for oil

resistance.

Work after the end of daily operation:

12.

① Wipe the outside of the cleaning machine with dry and wet cloth.

The sewage in the sewage tank is emptied and cleaned.

Rise the brush disc and squeegee, and park the floor washer in a flat, dry

and ventilated environment without flammable gas, liquid or chemicals.

④ If it stops using for a long time, it should be charged regularly to protect the

service life of the battery, open the cover, air-dry, and cover the floor washer

with dust-proof cloth for storage.

- 10 -