ALUZ ZIBI A1 Series Manual - Page 3
Browse online or download pdf Manual for Lighting Equipment ALUZ ZIBI A1 Series. ALUZ ZIBI A1 Series 13 pages. Surface zuco pivot bios illuminated
Also for ALUZ ZIBI A1 Series: Installation Instructions Manual (12 pages), Manual (11 pages), Manual (11 pages), Installation Instructions Manual (11 pages)
Print Page0-10V (Dry & Wet Location)
10
10
10
10
Note: 18/7 Gauge Wire. Outer jacket measures .45". Individual jackets measure .10"
DALI (Dry Location)
Note: 18/5 Gauge Wire. Outer jacket measures .45". Individual jackets measure .10"
DMX NOTE
• Consult third party DMX commissioner to modify at time of installation.
• Connection from DMX controller to luminaire must be made using a
proper daisy chain connection per DMX-512 / RDM standards.
• Do not make DMX wiring connections in parallel.
• When connecting DMX Shield to a DMX controller terminal, ensure that
it is not connected to or touching earth ground, chassis ground, and/or
DC power (-) return.
Note: Verify wire colors and wiring diagram from fi xture before connecting. If there is a discrepancy, consult factory before connecting.
1170 N Red Gum St, Anaheim, CA 92806
aluz.lighting
© ALUZ All Rights Reserved. ALUZ reserves the right to make changes or withdraw specifi cations without prior notice.
A1 Series | Surface
ZIBI Standard Dynamic White
(A1-ZIBI-STN-DWH)
+ (
)
5
- (
)
6
+ (
)
3
- (
)
4
(
)
(
)
2
(
)
1
120-277
+ (
)
- (
)
(
)
(
)
120-277
(
)
866.ALUZ.LTG | 714.535.7900
DMX (Dry or Wet Location)
Note: 18/5 Gauge Wire. Outer jacket measures .34". Individual jackets measure .13"
DALI (Wet Location)
Note: 18/5 Gauge Wire. Outer jacket measures .45". Individual jackets measure .10"
DALI NOTE
• DALI commissioning to be performed by a third party at time of
installation. ALUZ does not provide DALI commissioning.
Wiring Diagrams
+ (
)
- (
)
(
)
(
/
)
(
)
(
)
120-277
+ (
)
3
- (
)
4
(
)
(
)
2
120-277
(
)
1
Installation Instructions
9 / 11 / 2023 / Rev 4
Page 3 of 13