Alva HAWK G539 Operating Instructions Manual - Page 12

Browse online or download pdf Operating Instructions Manual for Grill Alva HAWK G539. Alva HAWK G539 19 pages.

Print Page

CLEANING THE GRIDS

After cooking, turn the burner control to "OFF" and let the BBQ cool before

attempting to clean your grill plates.

Before rst use - as well as periodically - we suggest that you wash the grids in a mild

soap and warm water solution.

You can use a wash cloth, a vegetable brush, or non-metallic scouring pad to clean

your grids.

CLEANING THE FLAME TAMER

Washing the ame tamers after every use is not necessary but we suggest that you

frequently wash the ame tamer in a soap and warm water solution.

Use a non-metallic brush/scourer to remove stubborn burnt-on cooking residue.

Dry the ame tamer thoroughly before you reinstall it in the cooking body.

CLEANING THE DRIP TRAY

The drip tray should be emptied and wiped down periodically and washed in a mild

detergent and warm water solution.

A level layer of clean dry sand should be placed in the bottom of the sand tray to

absorb the grease. Lining the tray with aluminium foil before use will aid in cleaning.

ANNUAL CLEANING OF BBQ HOUSING

Burning-o the grill after cooking will keep it ready for instant use, however, once a

year you should give the entire BBQ a thorough cleaning to keep it in top operating

condition.

1. Turn the burner controls to the "OFF" position.

2. Turn the cylinder valve o fully.

3. Detach the regulator assembly from cylinder valve by turning the quick coupling

nut.

4. Remove and clean (as explained above) the grids, ame tamer and burners.

5. Cover the gas valve ori ces with aluminium foil.

6. Brush the inside and bottom of the BBQ with a cleaning brush, and wash down

with a mild soap and warm water solution. Rinse thoroughly and let dry.

7. Remove aluminium foil from ori ces and check ori ces for obstruction.

8. Check spark electrode, adjusting it as instructed. Electrode tip pointing toward

the tip of gas collector and approximately 5 mm from the tip of collector box.

9. Replace burners. Adjust spark electrode collector box.

10. Replace ame tamer, grids and warming rack.

11. Re-connect to gas supply.