Alva eph62 Instruction Manual - Page 12

Browse online or download pdf Instruction Manual for Heater Alva eph62. Alva eph62 17 pages. Infrared heater with telescopic stand

Print Page

Turn the power on, the unit will beep once. The digital screen and

the indicator will now display. Once this happens press the On/Off

button to enter standby mode.

Press the function button to select your power level. The P.0

indicator will appear on the screen and will flash 3 times, indicat-

ing that the appliance is in Standby mode. The P.1 indicator will

appear on the screen and will flash 3 times, indicating that the

appliance is in low heat mode. Press the function button again to

select medium heat, the buzzer will beep once, the P.2 indicator

will appear on the screen and flash 3 times to indicate

medium heat has been selected. Press the function button again

to select high heat, the buzzer will beep once, the P.3 indicator

will appear on the screen and flash 3 times to indicate high heat

has been selected.

In Standby mode, press the timer button. The appliance can be

set from 1 to 24 hours. Once the time has been set the indicator

will light up, indicating that the timer function has been selected. 0

indicates that no time has been set.

To view the current time, press the timer button, this will display

the present setting time. The indicator will flash 3 times to show

that the appliance has entered timer setting mode.

When the appliance is on, the screen will always display the

power setting (P.1 - P.2 - P.3)

Inserting batteries

Fig.I

Remove the battery cover from

the back of the unit and insert the bat-

teries in accordance with the polarity of

the batteries . (Figure I)

Replace the old batteries with the same

type of batteries or the heater function

may be impaired.

Remove the batteries before long peri-

ods of non-use to prevent

leakage which will damage the

remote control.

Replacement

Battery

CR2025

Available from